How do you install the LCN 9530 Senior Swing (STD) pull arm?
When installing the arm; the gearbox shaft and door must be at the (+90°) full open position. The following step are used to install the Senior Swing (STD) pull arm.
Install t...
Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing » LCN
What comes with the 9530-MS Screw pack?
The 9530-MS screw pack is the Sr. Swing Pull Arm Screw bag and it includes; roller (1), MS (2), WS (2), Hex cap arm screw (1), washer (1), and rivet nuts (2)....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing » LCN | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » LCN
Can you use a Senior swing with a balance door?
Push side only, has to have a 12 1/4 spindle center. Single door minimum is 43" and a double door is a 84" door minimum....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing » LCN | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » LCN | Schlage Commercial
How is a ELR or panic device wired to a Senior Swing?
EL devices are wired to the Senior Swing, using the P10 (761465) cable. Connect the "GRAY" wire to the SC terminal on the 900-2RS card in the Von Duprin Power Supply and the "VIOLET" wire to the ...
Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing » LCN
What are ElectroMechanical Automatic Operators?
ElectroMechanical Automatic Operators are designed to automatically open when activated.
The Benchmark Series are Medium Duty "Commercial" automatic operators, often used on offic...
Schlage Commercial » Automatic Operators » Electromechanical » Benchmark » LCN | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing » LCN | Schlage Commercial » LCN
When did we start shipping the Senior Swing, Benchmark, and Falcon operators with the ES Filter?
On the Benchmark, if there is line noise from a strike then the unit will lose it's hold open time. Adding the ES Filter, which is a diode, will resolve this issue and the unit will hold it's pr...
Schlage Commercial » Automatic Operators » Electromechanical » 8200 Series » Falcon | Schlage Commercial » Automatic Operators » Electromechanical » Benchmark » LCN | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing » LCN
What is in the 9540-MS screw pack?
The 9540-MS screw pack (Sr Swing push arm screw pack) includes; Machine Screws (2), Thru bolts (2), Hex arm cap screw (1), and washer (1)....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing » LCN | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » LCN | Schlage Commercial