Category: LCN

(Results from 31 to 40)
Does LCN offer a full length actuator?
While the activation surface is only 36” tall, the entire actuator is 39" tall. The additional height comes from the two endcaps on the actuator. ...
Schlage Commercial » Door Controls » Automatic Operator » 8310 Series » LCN
Did the LCN Bollard Post mount bracket change?
Around the end of February 2017, an improvement was made to the LCN Bollard Post mounting brackets to address the fastening of the bollard post to the bracket.  The new design is much more s...
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series » LCN | Schlage Commercial
What is a 8310-853TA actuator from LCN?
On March 27, 2019 LCN came out with the 8310-853TA actuator, which is a 4.75" square actuator with the Active wheelchair logo and text.  ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Actuators | Schlage Commercial » Automatic Operators » Actuators » Actuators and Accessories | Schlage Commercial » Automatic Operators » Actuators » Actuators and Accessories » LCN | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series » LCN | Schlage Commercial » LCN | Schlage Commercial
What is the LCN 8310-852TA actuator?
On March 27, 2019, LCN came out with a 8310-852TA actuator, which is a 6" round actuator with the Active Wheelchair logo and text. ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Actuators | Schlage Commercial » Automatic Operators » Actuators » Actuators and Accessories | Schlage Commercial » Automatic Operators » Actuators » Actuators and Accessories » LCN | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series » LCN | Schlage Commercial » LCN | Schlage Commercial
Is the LCN 8310-813 touchless actuator a NEMA 4 certified actuator?
No, The LCN offering of a 8310-813 touchless actuator is not NEMA 4 certified....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Actuators | Schlage Commercial » Automatic Operators » Actuators » Actuators and Accessories | Schlage Commercial » Automatic Operators » Actuators » Actuators and Accessories » LCN | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series » LCN | Schlage Commercial
Can the key cylinder on the LCN 8310-806K be replaced?
The LCN 8310-806K is a special three position on/off/hold open cam lock switch designed to be used with LCN and Falcon auto operators.  They are all keyed alike and not intended to be rekeyed o...
Schlage Commercial » Door Controls » Automatic Operator » 8310 Series » LCN
Are the mounting screws that come with the LCN actuators available for individual purchase?
Unfortunately not, as LCN does not carry individual actuator mounting hardware.   ...
Schlage Commercial » Automatic Operators » Actuators | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series » Falcon | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series » LCN
Why does my LZR Mircoscan Sensor keep activating the door when I get into the sensors range?
:If no motion sensors are being used for activation (using a push button for activation), then the “Knowing Act” program on the LZR hub should be changed to “On” (default is “Off”) – thi...
Schlage Commercial » Automatic Operators » Electromechanical | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing » LCN | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series » LCN
What gauge steel is used for the LCN bollard post and mounting bracket?
3mm or #7 gauge sheet steel...
Schlage Commercial » Automatic Operators » Actuators » Actuators and Accessories » LCN | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series » LCN
Does LCN sell the lens cover only for the 8310-877 Head Mount Safety Sensor or the 8310-804 -1(2) Door Mount Safety Sensors?
Unfortunately, LCN does not inventory or sell this part of the sensors separately.  An entire new unit will need to be ordered to get the lens. ...
Schlage Commercial » Door Controls » Automatic Operator » 8310 Series | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series » Falcon | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series » LCN