Can a 4600 operator be used with a swing clear hinge?
Both the 4631 & 4642 can be used with a swing clear hinge. For the 4631 pull side mount you would locate the operator and track from the centerline of the swing clear hinge pin.For the 4642 p...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4630 Series | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series
What material are the LCN mounting screws made from?
The mounting screws supplied with LCN closers are made of steel with a Zinc coating....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial » Door Controls » Surface Mounted » 4010 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series | Schlage Commercial | Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP
Is there a part number for a 5 second chexit alarm sign?
Any Chexit sign other than the standard 15 Second Delay or the 30 Second Delay signs identified in the price book are special order items and should be ordered by description ("Chexit Sign XX Second D...
Schlage Commercial » Automatic Operators
25 R -2 Bulletin
The dual cylinder option is now available to order for Falcon 25 rim with lever trim exit devices. The dual cylinder option (-2) allows for intuitive unlocking and locking of the out...
Schlage Commercial » Automatic Operators
Can you mount a 4642 on a 1 ½” frame face?
For a 1 ½” face frame you will need to use ST-3449. This application requires an iron angle support bracket by others....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series