What end caps come with the 4642 CS closer.
The 4642CS or 4631CS operator will be shipped with the following end caps-Qty of 1- 4640/4630-334-2 blank end cap Qty of 1- 4640/4630-334CS end cap and switch ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4630 Series | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series
Are the 4040SE and 4040SEH rollers the same?
The 4040SE and SEH roller is not the same. The 4040SE-3034SE roller has a 1/8” shoulder while the SEH-3034SE roller has a ¼” shoulder on the roller....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Fire Life Safety | Schlage Commercial » Door Controls » Fire Life Safety » SEH Series | Schlage Commercial
Can a Sr Swing operator be used in a blow open application?
See here for published Allegion Reference Sheet on using a Sr Swing in a blow open application....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing | Schlage Commercial
What is the overall length of the 4640-480 shaft extender?
Overall length of the 4640-480 shaft extender is 1"....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series
What are 5 Green flashes on card swipe on BE467 lock
5 green LED's at the Control lock means it is in capture mode. It could be an issue when the lock was commissioned. You can try to do a long press of the sync button. If that does not ...
Schlage Commercial » Automatic Operators
Can you order the senior swing mounting plate in special finishes?
For other individual swing parts in a RAL Powder Coat or standard powder coats EXCEPT for Matte Black, order as normal and standard RAL add on costs apply to RAL finishes. This includes the -18 ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
What power is required for the wall adapter on the 6440XP?
110 volts are required for the wall outlet. Then the supplied plug (wall adaptor) takes it down to 24 VDC, which is the voltage needed for the motor of the 6440XP.See here for the 6440XP instruct...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 6440XP
When using fire alarm contacts on 4600 will that drop the auxiliary power?
When using the fire alarm contacts on the 4600 operator this will only inhibit the activation when the fire alarm goes off. The output power will still be applied to maglocks and other accessories tha...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic | Schlage Commercial » Automatic Operators » Electrohydraulic » 4630 Series | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series
How many boxes does a Sr Swing operator ship in?
The Sr Swing models 9530, 9540, 2810 ship in 3 cartons: 1 for the header, 1 for the motor/gearbox and 1 consolidation box (contains -control box, arm assembly, label kit etc).The Sr Swing models 9550 ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing