Category: Falcon

(Results from 11 to 20)
What is the California State Reference Code regarding lever return?
This is in regards to the California State Reference Code, (Formerly Title 19, California State Fire Marshal Standard) stating that all levers with returns comply; levers must return to within 1/2" ...
Mechanical Locks » Cylindrical » B Series » Falcon | Mechanical Locks » Cylindrical » RU Series » Falcon | Mechanical Locks » Cylindrical » T Series » Falcon | Mechanical Locks » Cylindrical » W Series » Falcon | Mechanical Locks » Cylindrical » AL Series » Schlage | Mechanical Locks » Cylindrical » ND Series » Schlage | Mechanical Locks » Tubular / Interconnected » CS200 Series » Schlage | Mechanical Locks » Mortised » MA-Series » Falcon | Mechanical Locks » Mortised » L9000 Series » Schlage | Mechanical Locks » Mortised » LV9000-Series » Schlage | Mechanical Locks » Tubular / Interconnected » H Series » Falcon | Mechanical Locks » Tubular / Interconnected » Y Series » Falcon | Mechanical Locks » Tubular / Interconnected » S200 Series » Schlage | Mechanical Locks » Tubular / Interconnected » S-Series » Schlage | Falcon | Von Duprin
MA launch information
The MA was launched 4/1/10 and replaced the Falcon M lock. Newer Marketing Bulletin added on 4/26/2010 (Some items not yet available!!) ...
Mechanical Locks » Mortised » MA-Series » Falcon | Falcon
What is the difference between the Falcon M and MA series mortise locks?
Here are some of the major differences between the M and MA-Series.  Lever mounting post holes -  Locations have changed on door template.  (12 and 6 o'clock for M lock, MA lock is approx 1 and...
Mechanical Locks » Mortised » MA-Series » Falcon | Falcon
What is the control bitting for Falcon 0 bitted cores?
A zero bitted Falcon SFIC core is combinated for the control key to be cut at all 4's....
Key Systems » Cylinders » Cylinder » Falcon | Falcon
How do I retro fit the 2390 into the 1390 muntin?
Replace the device and vertical rods with the current 2390 device and possibly a filler plate. A filler plate may be needed as the older 1390 device was sized per order whereas the 2390 is only o...
Exit Devices » Recessed » 2390 Series » Falcon | Falcon
Will a Falcon cylinder work in a Schlage lock?
Key in lever Falcon cylinders do not work in Schlage locks.  The cylinders may fit, but there are no specific tailpieces created to operate any Schlage lock. SFIC SFIC is universal so Falcon an...
Key Systems » Cylinders » Cylinder » Falcon | Falcon
How are interchangeable cores installed?
A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an inte...
Key Systems » Cylinder Mechanism » Schlage | Key Systems » Cylinders » Cylinder » Falcon | Key Systems » Keys » Keys » Falcon | Key Systems » Keys » Keys » Schlage | Falcon
Are parts still available for the old Falcon M locks?
Only the lever return spring is available.Related solution: What is the part number for the lever return spring for the old M series mortise lock?...
Falcon
How do I find ANSI BHMA codes and their meanings?
BHMA provides a certified products directory complete with function codes and meanings from most of the major lock manufacturers.  The most up-to-date directory can be accessed through their...
Falcon | Ives | LCN | Schlage | Von Duprin
Can a 712L or 912L be converted to L-NL in the field?
The current 712L/912L (after 2/28/2011) can be field converted by purchasing the NL Spring part #600339 and following the L to NL function change instructions....
Falcon