Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can I take a 5654 mullion and change to a steel mullion using same prep as 33 rim device?

Resolution: Yes. Use the 1654 or KR1654 to get the removable mullion.:

Is the Schlage trim CO-100-993 compatible with Von Duprin 8875?

Resolution: The CO-100-993 Exit Trim is compatible with the exit devices listed on their data sheet. :

Can I replace a 4954 with a KR4854 mullion?

Resolution: Yes. :

I have a trim template. Where is the exit device template information?

Resolution: The exit device will have a separate template from the trim. The specific template will be based upon the device model.To find all templates, go to our template directory on our website. &nbs...:

Is it possible to convert Von Duprin 2227 (surface vertical rod) to less bottom rod on a rated opening?

Resolution: Less Bottom Rod (LBR) has been tested with 499F strike and auxiliary fire pin.Order 050171-32 and install strikes and fire pin. :

Is the potted circuit breaker included in the 050853-00 EL Conversion Kit ?

Resolution: Yes, the potted module should be included. If not included, please contact Customer Care at link below for replacement. Click Here:

What is Schlage's Antimicrobial (AM) finish?

Resolution: Schlage's Antimicrobial (AM) finish is a clear coat finish that contains an antimicrobial agent and is designed for interior or exterior applications and provides a combination of good physical, ch...:

Is there a different PA shoe required when installing a 4050 Delay cylinder in a parallel arm mount?

Resolution: The old obsolete LCN 4050 delay closer required a different PA shoe which was over an inch longer than the standard PA shoe and is stamped with a DA. This was required for the...:

Can you order a 9827 or 9927 panic device Less Bottom Rod (LBR)?

Resolution: Panic Rated 98/9927 and 98/9947 devices can be ordered Less Bottom Rod (LBR).The price book does not specifically reference this option on panic rated devices, but there is no additional charge.The...:

How much force can a Schlage commercial key withstand?

Resolution: Schlage commercial keys (made from Nickel Silver alloy) can typically withstand a force between 45-50 Lbf-in (5.08-5.65 Nm).: