Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Are Ives hinges available in a 621 finish?

Resolution: There are no Ives hinges available in a 621 distressed nickel finish.:

What are the different KA options from Schlage?

Resolution: Schlage offers five different options for cylinders Keyed Alike (KA): Keyed Alike 0-bitted (KA 0-bit)Keyed Alike 1-bitted (KA 1-bit)Keyed Alike to Specific CombinationKeyed Alike ...:

Is the LCN -480 shaft extended supplied in a finish that matches the closer?

Resolution: For the 4050AT closers-The 4050AT-480 shaft extenders that are shipped out for any 4050AT orders get powder coated to match the cylinder/closer color. So if you order a replacement part,...:

Where is the fire label located on a fire rated mullion?

Resolution: The UL fire label is at the bottom of the fire rated mullion. The mullion also ships with a sticker which notes the bottom of the mullion should not be cut. Cutting would remove the fir...:

Is the 9852/9952 pool gate device available with standard 990/996 trim?

Resolution: The 98/9952 Pool Gate Device can be ordered with either the EO (Exit Only, no trim), L (with a 252L Lever Trim, cylinder locks/unlocks the lever) or L-BE (with a 252L-BE Passage Lever Trim).The 252...:

Is there a low current request to exit (RX-LC) switch for Falcon 24 and 25 series exit devices?

Resolution: The standard Falcon 24/25 series RX switch is a low current RX switch.:

What are dimensions of Falcon 212L Trim Escutcheon

Resolution: Falcon 212L escutcheon size is: 2 5/8" Wide 8 " High 7/8 " Deep :

Is the ND series HSLR trim handed?

Resolution: All ND HSLR trims; keyed and non-keyed are handed and cannot be changed in the field. Please see below for how to determine how to order a reverse bevel ND HSLR lock. See here on how to determine...:

Is the ALX series UL certified?

Resolution: When specified with the 14-042 (3/4" throw) fire latch, the ALX is UL certified for use on 8' x 8' 3-hour pair doors.:

Does LCN offer a chain driven operator with a 4020 cylinder?

Resolution: LCN does not offer an operator for the 4021 series closer. There is a operator on the market, made by Nabco, that uses a modified 4021 cylinder. All support/warranty/replacements ...: