Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: Part number 1398 is a Core and Key stamping fixture, click here for image.:

Resolution: Motorized latch retraction is not available on the 1590:

Can Falcon combinated Small Format interchangeable cores be ordered 0-bitted?

Resolution: As of June 25th, 2022 Falcon has discontinued the offering of 0-bit SFIC cores as an option. SFIC cores are not available 1-bitted.For cores pinned at the factory Falcon offers keyed alike (KA...:

Is there an adapter kit for the Falcon D100 and D200 using interchangeable core for a 1 3/8" thick door?

Resolution: Order part number 36-071 (found in the Falcon price book) for use with the Falcon D100 and D200 series deadbolts using interchangeable core in a 1 3/8" thick door. :

How do you hand a Falcon H2 series interconnected lock?

Resolution: There are three components that have to be adjusted on the Falcon H2 series to be handed correctly: Screw on the inside chassis plate (change positions) Internal cam on the inside le...:

Are the ND series levers the same for electrified and non-electrified locks?

Resolution: The part numbers for the levers are the same for the electrified and non-electrified ND cylindrical lock sets. :

Diode Included with DC Voltage Product

Resolution: The diode is supplied as optional backfeed protection for many products. There are two ways to tie in these diodes: 1) In series with the + voltage line to load: Anode t...:

New Design (after May 2018) AD-series and CO-series 993M - Spindle Hub Plate Binding on Mortise Case

Resolution: In May 2018, the AD-series and CO-series trims were overhauled to a new full-length body design, replacing the old short-body-with-long-plate trim that had been in use since product launch. T...:

What is a KZ38BA1 and is it still available?

Resolution: KZ38BA1 was discontinued in May 2019. Cylinder housing used on KS Padlocks 20, 40, 70, 80, 90 and KC-Series cylinder housing. :

Does Ives offer a protection plate in 643E finish?

Resolution: 643E is not available with Ives protection plates. Black is the closest finish that is offered. US10B is also available, but that is a living finish that will wear over time. Schl...: