Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Is knurling avaliable on a 230L 06 lever?

Resolution: Von Duprin can make a 230L Lever Trim with a Knurled 06 Lever Design (06KN) as a special order product.:

Where is the serial number stamped on a restricted Everest key?

Resolution: On Everest and Everest 29 keys, serialized stamping will typically default to Field 2. (See drawings below.) Sometimes on SFIC keys (Everest B and Everest 29 R), the serialized stamping...:

What stop is standard for Republic MH Double egress series Frames?

Resolution: 5/8" stop is standard.:

What is the standard rabbet size for Republic MH Double egress series frames?

Resolution: The standard rabbet size for MH Double Egress frames is equal 1-15/16" rabbets for 1-3/4" doors.:

What face sizes are available for Republic MH Double egress series frames?

Resolution: The MH Double Egress series is specified with a 2" face.:

What gauge material is available for Republic MH series Double egress frames?

Resolution: 16 gauge or 14 gauge.:

What door thicknesses are Republic MH series Double egress frames manufactured to accommodate?

Resolution: MH Double Egress frames accommodate 1-3/4" doors (1-15/16" rabbets).:

What is the purpose of Republic MH series Double egress frames?

Resolution: Republic MH series double egress openings are designed to permit the flow of traffic in two directions through the same opening.:

Why does an Ad 400 stay locked on access granted but then unlocks on the auto relock?

Resolution: Reported but unconfirmed. FDR and reset the lockset and then link and test again. It could be an issue related to failed motor/stall or green light no motor.:

Can you update the firmware on the WPR-400?

Resolution: No, you cannot: