Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Does Medeco make a FSIC core to fit Schlage FSIC prep?

Resolution: Per the Medeco website they offer an IC core 322201 to fit the Schlage FSIC prep. You should verify with Medeco.:

How do you convert a ND80 Mechanical Storeroom lock to a ND12 Exit Lock?

Resolution: You will need to swap out the keyed lever with a closed lever, and there will be additional parts needed to complete the conversion. On the ND80, remove the outside lever and cylinder. Fo...:

What is the part number for the SFIC Tailpiece and Spacer kit for the Falcon TM series Classroom lock?

Resolution: Part number 47499472 is the SFIC Tailpiece and spacer kit for the classrom function TM561, TM575 Classroom Security, and for the inside cylinder for the TM381 Vestibule lock.Part number 47499470 is...:

When ordering a Falcon TM for JD prep what cylinder is needed?

Resolution: When ordering J or JD prep it is designed to receive a Schlage FSIC core, Schlage # 23-030 or 20-740 FSIC can be used.The lever and atilpiece for a Schlage FSIC core will be provided. :

Is the Accent lever design available with the Schlage ND series cylindrical lock?

Resolution: The Accent lever design is not available with the ND series cylindrical locks. The Accent lever design is available with the L9000, LM9200, LM9300 Mortise locks, and available with the CS200 s...:

Can the B572 be used as an indicator only without the deadbolt installed?

Resolution: It is not recommended to use the B572 without the deadbolt installed.Without the deadbolt acting as a stop for the tailpiece it can be overturned and will cause damage to the drivers on the cointur...:

Will our PS 900 series work with a third-party battery back up?

Resolution: No, The Battery has to be a 7-amp hour sealed lead acid battery otherwise the charging current is wrong:

Do the Schlage MT Series readers have a UL Listing?

Resolution: Yes, they are UL294 certified.:

Can you use/spec a Schlage M400 Series Mag Lock with a Von Duprin exit device?

Resolution: Yes, Schlage Mag Locks do not have a release delay. They are certified to the ANSI/BHMA standard of 500 milli-seconds or less of residual magnetism. :

Can you convert a Schlage 672 to a 692?

Resolution: No, the 672 and 692 cannot be converted between one another.: