Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Is it possible to reset Falcon and Von Duprin alarm kits (ALK) with an access control system?

Resolution: Yes, the Falcon and Von Duprin ALKs can be reset using an access control system connected to the External Inhibit terminals, the ALK key switch assembly, or the ALK automatic reset feature.:

Can the Von Duprin 230L trim be used on doors thicker than 2-1/4"?

Resolution: The 230L trim cannot be used on doors thicker than 2-¼". Von Duprin does not offer parts to accommodate 22 Series Devices and Trims for doors over 2 ¼" thick.Consider using 98/99 or 33A/35A Se...:

Can the Von Duprin EPT-2 and EPT-10 be ordered less wires?

Resolution: The EPT-2 and EPT-10 are only available with wires pre-installed.:

What is the part number for a T-pin used in Schlage residential cylinders?

Resolution: In the Schlage residential compressible cylinders, a T-pin style top pin is used. The part number is F506-451. It is available for sale according to the Residential Price Book. He...:

What armor front is used with the 10-075 rabbeted strike?

Resolution: When installing an L9000 lock on a rabbeted door, Schlage recommends ordering with the 10-075 rabbeted strike as well as the thinner armor front (1-1/16" width). See catalog or price book for...:

What is XB03-427?

Resolution: The part number XB03-427 is added to B252 locks when ordering for door thickness range of 2-3/4" to 5-9/16". Specify door thickness.XB03-427 is not available as a separate part and ...:

Is Vandlgard an option on the new MLR L9000 electrified locks?

Resolution: Vandlgard is not available on Motorized Latch Retraction functions.:

Does Schlage or Falcon offer a cylindrical lock with latch monitoring?

Resolution: Neither Schlage nor Falcon offer latch monitoring on cylindrical locks.:

Are Safety Sensors fire rated?

Resolution: The 8310-804-1 or 8310-804-2 door mounted safety sensors are not UL listed and are not fire rated.:

What is the bottom rail needed for the GE pivot when using the OHC 100 with the SL arm?

Resolution: The required door bottom rail for the OHC GE pivot is 1 9/16".: