Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Does Falcon offer a storeroom with deadbolt mortise like the L9480?

Resolution: The Falcon MA641 is named a Dormitory lock but its function is the same as the Schlage L9480.Latch bolt by knob/lever inside and key outside.Inside knob/lever free. Outside knob/lever rigid. D...:

What can cause the L9000 HSLR lever stop to break?

Resolution: Normal use should not cause the lever stop to break off. Carts or have other equipment that run into the trim is usually the culprit.:

What is the part number for the Falcon 1490 to 1690 adapter plate?

Resolution: If replacing a Falcon 1490 device with a 1690 device, use 48540791-622: 1490 TO 1690 ADAPTER KIT, 622 to accommodate changes to the holes in the door.:

What is the part number for the Falcon 1590 to 1790 adapter plate?

Resolution: If replacing a Falcon 1590 device with a 1790 device, use 48540792-622: 1590 TO 1790 ADAPTER KIT, 622 to accommodate changes to the holes in the door. :

What is the lever return distance for the ALX Rhodes lever?

Resolution: The lever return (tip of lever to door face) for these models are listed below. Athens 2.4325 Rhodes .4125 Tubular . 403:

Do you use the 6 pin tail piece or the 7 pin tail piece for the disposable construction core on Flacon T series

Resolution: The SFIC disposable construction core accepts both 6-pin and 7-pin tailpieces.:

Is the Von Duprin MT54 wall-mounted storage kit compatible with non-keyed removable mullions?

Resolution: The MT54 storage kit is only compatible with keyed removable (KR) mullions with model numbers that end in 54 (ex. KR4954, KR9954, etc.)..:

What is the difference between the 110NL-MD and the 110NL-WD?

Resolution: The 110NL-MD, used on hollow metal doors, uses a 1-1/16" deep cylinder collar which allows the key cylinder to penetrate deeper into the door.The 110NL-WD, used on wood doors, uses a 1-3/8" deep cy...:

What is the size of the set screw at the bottom of the ND indicator escutcheon?

Resolution: Screw Specifications: #10-32 x 5/16-inch cone point set screw:

Does Falcon offer a 5-foot option for the 24 and 25 Series?

Resolution: Falcon does not offer a 5-foot option for the 24 and 25 Series; neither as a standard product nor a special order.: