Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What face skins are available on Republic Steel Stiffened Doors?

Resolution: 18 gauge, 16 gauge, or 14 gauge (cold rolled steel or A60 galvannealed) G90 Galvanized available in 16 or 14 gauge only:

What type of bottom channel is available on the Republic Steel Stiffened Doors?

Resolution: Bottom channel is an inverted 16 gauge steel channel, projection welded at a maximum of 2-1/2" on center:

What is the part number for the Senior Swing IQ controller mounting bracket?

Resolution: With the launch of the Swing IQ in Nov 2025, there is two different Swing IQ control box mounting brackets. There is one for the concealed IQ units and a separate one for the Surface Mounted ...:

When an XP98/99 Exit Device is dogged, will the Push Pad be held in the depressed position?

Resolution: When using a Dogging Option located in the Cover Plate beyond the Push Pad of the device (HD, HDSI, CDSI, DI, CI), the push pad will be held in the retracted position when dogged.When using a Doggi...:

Is there a part number for the spacer plates for the WS-T application

Resolution: The WS-T Spacer Kit contains the Top Latch Spacer plate and 2 each Rod Guide Spacers used with WS-T devices.This Kit is available as a special order item at this time (April 2026).YKIT.60553 ...:

Is there a difference between L9453WP and L9453?

Resolution: The L9453 and L9453WP are the same lock.:

Can the Falcon TM series be specified to accept a 6-pin Kaba Peaks KIL cylinder?

Resolution: Yes. The TM series can be specified to accept a 6-pin Kaba Peaks KIL cylinder (L-PK6).:

Can the Falcon TM series be specified to accept a 6-pin ASSA KIL cylinder?

Resolution: Yes. The TM series can be specified to accept a 6-pin ASSA KIL cylinder (L-AS6).:

Can the Falcon TM series be specified to accept a 6-pin Corbin Russwin KIL cylinder?

Resolution: Yes. The TM series can be specified to accept a 6-pin Corbin Russwin LFIC core (J-CO6) or a 7-pin Corbin Russwin LFIC core (J-CO7).:

Can the Falcon TM series be specified to accept a 6-pin Sargent KIL cylinder?

Resolution: Yes the Falcon TM series can be specified to accept a 6-pin Sargent LFIC core (J-SAR).: