Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
FAQs
«
1249
1250
1251
1252
1253
»
Question
Answer
What are the dimensions of the LCN 6440 series drop plates?
Resolution:
:
Will a 2030 work on a 24” door?
Resolution:
You can order a 2030 closer with ST-0600 for it to work on an opening with a 24” door hung on hinges. This ST is for a special track and template.:
Can you use a 4510T with wide throw hinges?
Resolution:
You can use a wide throw hinge with the 4510T door closer, but you will lose degrees of opening by doing so. The wider the hinge the less degree of opening you will be able to achieve.:
Will the mounting screws get SRI coating if the closer is ordered with SRI?
Resolution:
The mounting screws/screw packs are not available with SRI coating.:
What is the diameter of the Falcon tapered collar blocking ring?
Resolution:
The diameter of the Falcon Tapered Collar at it's widest point is 1.86". The diameter is the same for the different tapered collars.See below for the different part numbers for the Tapered Collar.&...:
How do I order the 09-900 family of cylinder thumbturns with different cam?
Resolution:
The 09-900 family of cylinder thumbturns is not available with a different cam. You will need to order the cam needed on separate line item and install in the field. Use the non-m...:
What is the part number for the Schlage finish selector kit?
Resolution:
Part number for the Finish Selector Kit or Schlage Finish Ring is 39-029:
Is there a 70 classroom function available for the Schlage PM series mortise locks?
Resolution:
A PM070 Classroom function is not available with the Schlage PM Series mortise locks.:
What cam does the PDQ exit device trim use?
Resolution:
The PDQ exit device requires a standard straight cam. Standard conventional cylinder 1-1/8", 1-3/8", 1-5/8" - L583-476Standard conventional cylinder 1-¼",1-½",1-¾" - L583-477 FSIC and SFI...:
How many W series locks fit on a pallet?
Resolution:
On a standard pallet, you can fit 240 W-series lever locks and knob locks, excluding the 12-function lever/knob models. :
«
1249
1250
1251
1252
1253
»