Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

How do I change the tail piece orientation on XB11-979 to vertical?

Resolution: Follow steps below after reviewing picture here:1. Depress pin (letter D) using cap removal tool or tip of a pen. 2. Once pin is depressed rotate cap (letter G) counter clock until it can be r...:

What is the PT10?

Resolution: The Schlage PT10 is a Grade 2 tubular lock, part of the Schlage Performance Series.The PT10 functions as a Passage Latch. Levers only-both sides; spring latch. The latch is always retracted by leve...:

What is the PT40?

Resolution: The Schlage PT40 is a Grade 2 tubular lock, part of the Schlage Performance Series.The PT40 functions as a Bath/bedroom privacy lock. Lever with emergency release privacy-pin access in rose outside...:

What is the standard undercut on a Republic Steel Stiffened Doors?

Resolution: Standard undercut is 3/4".:

What is the actual door size of a Republic Steel Stiffened Doors?

Resolution: Actual Door Size: Door undersized from nominal by 1/4" in width and 7/8" in height.:

What is the PT170

Resolution: The Schlage PT170 is a Grade 2 tubular lock, part of the Schlage Performance Series.The PT170 functions as a Single dummy trim. Fixed lever one side only; no latch or chassis. Used for door pull or...:

What is the PT172?

Resolution: The Schlage PT172 is a Grade 2 tubular lock, part of the Schlage Performance Series.The PT172 functions as a Double dummy trim. Fixed levers-both sides; no latch or chassis. Used for door pull or m...:

What are BHMA Ratings?

Resolution: While the styles we offer have changed to reflect the times, Schlage has upheld the same commitment to quality for decades. That’s why our door hardware is volunteered for testing against the highe...:

Can you install a bumper in a LCN 4210T track?

Resolution: You cannot use/install a bumper in the 4210T high security closer. Also, there is no ST for adding a bumper to a 4210T track, as it's internal profile will not accept the bumper stop, plus i...:

Can the Falcon T series cylindrical lock be ordered with a Lead lining option?

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. The Falcon T series can be ordered with the option Lead Lining only available on the following ...: