Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Is there a special template needed for a 4310ME used with a concealed GJ overhead stop?

Resolution: To use the LCN 4810 with a GJ concealed overhead stop you would need to order the closer X ST-2599, which will give you a special track mounting bracket.:

Is there an ST for mounting a 4040XPT pull side with a concealed GJ stop or on a Rabbeted door?

Resolution: When using the 4040XPT mounted pull side with a GJ concealed or on a rabbeted door you would use ST-3182 and the 4040XPT-18G plate (purchased separately) for compatibility between the 4040XPT and c...:

How many keys will I receive if I order a Non Primus FSIC cylinder 1-bitted?

Resolution: Two (1-Bitted) keys will be included. :

What is the part number for the L9094 lock body?

Resolution: The L9094 lock body is the same as the L9090/92 lock body. :

What combinating rule is used as a default for Falcon SFIC cores?

Resolution: Falcon utilizes a few different combinating rules including 018, 025, A2, and A4*. These combinating rules are also sometimes called pinning types or system types. If not specified, the...:

Can the LV9081 be rehanded in the field?

Resolution: You can change the handing of the LV9081 with the correct cam for the cylinder.:

Can I order the Falcon SARGENT Conventional 6 pin Cylinder Master Keyed?

Resolution: Master keying is not available. Cylinders are only available in either KD or 0-Bit and are furnished 0-bit unless otherwise specified. Specify LA keyway when ordering. Refer to the Falcon Comm...:

Can a negative Facility Code be added to the MTK15 reader for 26-bit Wiegand?

Resolution: No, must be between 0 – 255.:

What is the country of origin for the M490 and M490P?

Resolution: The country of origin is China.:

What is the country of origin for the M490DE and M490DEP?

Resolution: The country of origin is China.: