Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Are silencer preps available in Republic SE series frames?

Resolution: Silencer Prep – 9/32" dia. holes shall be provided as standard on strike jambs and double headers, (3 per strike jamb and 2 per double head). Mutes are not supplied and must be ordered separately.:

What anchors come with Republic SE Series Frames?

Resolution: Prepared Opening Anchor, Wire Anchor, Wood Stud Anchor, “T” Anchor, “Z” Anchor:

Can you order the XE360 lock master keyed?

Resolution: The XE360 does not offer master keying. Only three keying options are available: KA by Group, KA by Quantity, and KA by Specific combination.:

Do you have to calibrate the L9000 MLR?

Resolution: See video demonstrating how to calibrate the MLR L9000 chassis.:

How does the RX switch work with L9000 MLR?

Resolution: The RX switch on the L9000 MLR monitors the rotation of the inside lever in the same way as the RX switch on the L9000 electrified lever control.:

Does SOSS have a hinge that will work with doors thinker than 2"?

Resolution: The model 220 is for 2" or thicker doorsThe online calculator only goes up to 2", but the 220 model can be used in thicker doors, even bookcase applications, that are 8" or 12" deep.:

What door prep is required for the Falcon Double Dummy MA18 with rose trim?

Resolution: The Falcon MA18 Double Dummy trim does not have a lock body thus no mortise pocket.The following holes should be drilled based on the trim type:For rose (sectional) trim, drill the holes for lever ...:

What door thickness can a B500 with Indicator be used on?

Resolution: The B500 series deadbolt with Indicator can be installed on the following doors.Standard: 1-3⁄8" to 1-7⁄8" conventional cylinder or thumbturnInterchangeable Core: 1-5⁄8" to 2" :

What door prep is required for Falcon Single Dummy MA12 with rose trim?

Resolution: The Falcon MA12 Single Dummy trim does not have a lock body thus no mortise pocket.The following holes should be drilled based on the trim type:For rose (sectional) trim, drill the hole for lever s...:

Do the RU and T series use the same latches?

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. The RU and T series latches are not compatible.: