Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

How do you replace the tamper switch on AD 400 Locks?

Resolution: Purchase a new main interior board- part# 46929048:

What is the gauge for the wires coming out of the 660-PB and the 660-T4?

Resolution: The wires are 22 gauge.:

What is the distance from the edge of the door to the inside edge of the HSLR trim?

Resolution: The distance from the door edge to the inside edge of the HSLR trim is approximately .605" :

Can you use an LCN 2030 closer with wide throw hinges?

Resolution: The 2030 closer can be used with wide throw hinges but you will lose some degree of opening, will not achieve 180 degree of door swing. The wider the hinge the less degree of opening you will...:

What cam is required for Precision mortise exit device?

Resolution: Precision mortise exits use the standard straight cam.Schlage conventional camsL583-476 or L583-477Schlage IC camK510-730Falcon conventional cam#4 - A09897-000-00Falcon IC cam - ***CAM MUST B...:

Can the L9081 be ordered with the L suffix for Less Cylinder?

Resolution: For replacement purposes, use the following part numbers for a conventional cylinder on the L9081 or LV9081:30-019 (escutcheon)30-000 (rose) 91-130 (Everest SL escutcheon)91-129 (Everest SL rose):

Can the CS200 series be ordered with a Primus cylinder?

Resolution: There is no option to order a Primus conventional cylinder with the CS200 series, however you can order a S200 Primus cylinder and swap out the tailpiece for this application.Components needed:CS20...:

What is the std maximum tolerance for LCN mounting hole locations and installation?

Resolution: INTERNAL ONLY - Eng advised 1/16" is our std maximum tolerance:

What are the dimensions for the ND Indication trim?

Resolution: The ND Indicator escutcheon measures 3-11/16" wide and 6-1/16" long. Where the escutcheon joins the lever, it projects 1-3/16" from the face of the door. :

Is there a handing screw for the LV9091, LV9093, LV9095, LV9493, and LV9495?

Resolution: See video demonstrating operation of LV9091, LV9093, LV9095, LV9492, and LV9495 with and without handing screw installed.: