Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Are UL certifications for Schlage or Falcon locks for the chassis only?

Resolution: Schlage and Falcon products that have UL certification are certified as complete assemblies, including levers, latches, cylinders and other applicable trim and hardware.:

Is it possible to get 180 degree of door swing with an LCN 4211 and wide throw hinges?

Resolution: ST-2712 is for a special cut and weld EDA arm when used with wide throw hinges and needing 180° door swing. When ordering, you will need to specify size of the hinges, door thickness if other than ...:

What mortise cam type does a Modernus mortise lock use?

Resolution: Modernus mortise locks use the standard straight camFalconConventional #4 IC #5 SchlageConventional - L583-476/L583-477IC - K510-730:

Can you power multiple 6440 operators off one plug in wall adapter?

Resolution: You can only power one 6440 operator off the supplied plug in wall adapter. The wall adapter is a specifically designed step-down transformer and only has enough amp load to power one 6440 unit. :

What is the Key Black for the 806K?

Resolution: PRODUCT SUPPORT INFO ONLYThe 806k has 2 numbers stamped on it. A126 and 554G.A126 seems to be the key-codeS54G seems to be the model of the Key Blank itself. :

Can you mount a 4111 EDA closer on a 16” wide door?

Resolution: ST-3030 is for the 4111 EDA closer on a 16” wide door. This ST does require a special arm and templating. This cannot be used with the HEDA arm.:

Are the Schlage and Falcon cylinder compression springs the same?

Resolution: The Schlage and Falcon compression springs (wave washers) for use with mortise cylinders are not the same. The Schlage compression spring L583-195 measures 1.33" in diameter and it has a widt...:

Can you use a 3030 concealed closer with a Rixson 370 top pivot?

Resolution: ST-2964 is for the 3030 concealed closer being used with a Rixson 370 top pivot or pivot with similar dimensions.:

What is the maximum reveal for a Falcon SC70A closer mounted push side Top Jamb?

Resolution: Maximum reveal is 3 ¼".For Catalog cut sheet, see here.:

Can you use a 4040XP EDA closer with a GJ450 overhead stop?

Resolution: For this application (4040XP EDA style arm and GJ450) you would need the 4040XP EDAG closer X ST-2735. If using a Drop Plate with the closer, use the 4040XP-18 Drop plate, ordered separately....: