Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can the sr swing header be cut down in the field?

Resolution: We would not recommend doing this but if it is a single door header you can physically cut it down. Just make sure the end that is cut is the control box end not the motor end and minimum it should...:

Can the Sr Swing concealed operator work with concealed vertical rods?

Resolution: You can use concealed vertical rods with the 2800 series concealed operator with special templates and must use OP arms, no center pivots. If using a double door 2810DD/MP, 2850 or 2860 you would o...:

Will an ND series latch replace a D series Latch?

Resolution: The Schlage D-series 14-001 spring Latch was replaced with the 13-248 spring Latch. The 14-019 deadlatch was replaced with the 13-247 deadlatch. :

What is ST-0651 from LCN?

Resolution: ST-0651 is for the use of Offset Pivots (by others) with the 2030 series concealed closer.:

What is ST-0788 from LCN?

Resolution: ST-0788 is special templating for a 7/8" centerline of track to centerline of closer.:

What is ST-0907 from LCN

Resolution: ST-0907 is a special template for the LCN 3130 Concealed closer with Offset Pivots. ST has list of compatible Offset Pivots.:

What is the detection range of the 8310-815 touchless actuator?

Resolution: The detection zone is adjustable, 4” min -24" max. :

What is the detection range of the 8310-810 touchless actuators?

Resolution: The detection zone is adjustable 4” min -24" max:

What is the detection range of the 8310-2300 touchless actuators?

Resolution: The detection zone is adjustable 1” min - 12" max.Ships set at 6" detection zone:

What is the frequency for the receiver in the 8310-2210 Kit?

Resolution: The 8310-2210 wireless touchless actuator kit uses a 915Mhz receiver.LCN only offers a 915Mhz transmitter built into the 8310-2210 kit.: