Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

How do I order the L9412 lock body only?

Resolution: The L9412 is a Exit lock with deadbolt lock function and the lock body cannot be ordered as a separate part. You can order the lock less components to get the lock body only. Example: L94...:

Are 7-pin conventional cylinders available with Falcon double cylinder deadbolts?

Resolution: Due to space constraints, Falcon double cylinder deadbolts (D131 and D231 functions) are not available with 7-pin conventional cylinders (P7 suffix). All other Falcon keyed deadbolts (D...:

Can a SOSS model 216 invisible hinge and model 218 invisible hinge be used in the same door?

Resolution: The SOSS model 216 invisible hinge cannot be used with the model 218 invisible hinge. The pivot point on these hinges are different.:

What closer reinforcements (optional) are available on the Republic DE series door?

Resolution: 14 gauge 18" x 6" (Optional 12 gauge):

What gauge material is available for Republic SE series frames?

Resolution: 16, 14 or 12 gauge, cold-rolled or galvannealed steel:

Is the Republic DE series door handed?

Resolution: Non-handed standard (Optional handed):

Does the Republic DE series door come standard with a universal hinge prep?

Resolution: Universal Standard/Heavy Weight Hinge – Hinge fillers are used allowing for easy modification from heavy to standard weight hinge prep:

What SDI 100 Level/Model is the Republic DE series door?

Resolution: Level 2 Model 1 or 2 (Heavy Duty, minimum 18 gauge, hollow steel composite)Level 3 Model 1 or 2 (Extra Heavy Duty, minimum 16 gauge, hollow steel composite)Level 4 Model 1 or 2 (Maximum Duty, minim...:

Are L9000 lock trim kits available with Vandlgard?

Resolution: The LV9000 locks are available as trim kits with the same price deducts as the L9000 locks. Order as lock less lock case:Example: LV9040 06A 626 LLL LLL LLC:

How to prepare a door for the B571.

Resolution: The B571 required a 1-½" bore :