Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can the 4510T closer be used on 2” frame face?

Resolution: The minimum frame face needed for mounting the 4510T High Security Track is 2-1/8” with standard templating. ST-3509 can be used for frame faces a small at 1-3/4” – This ST is fo...:

Can I get SRI on the LCN PAH60 door holder?

Resolution: SRI – Special Rust Inhibitor is available for the PAH60 door holder:

Can you use a swing clear hinge with the 3130SE closer?

Resolution: ST-1237 is used for a 3130SE closer being mounted with a swing clear hinge. Just special templating, no special parts required.:

Can you use a swing clear hinge with the 2010 series closer?

Resolution: ST-0560 is used for a 2010 series closer being mounted with a swing clear hinge. Just special templating, no special parts required.This application limits door swing to maximum of 130 degrees.:

Can you get the delayed action option with a size 6 only closer, such as a 4116?

Resolution: Delayed Action is not available on any size 6 only closers, such as a 4016, 4026, 4116 etc….This is because with the stronger spring it would pull the closer thru the set delayed action.:

What indicators do you get when you order XL13-346?

Resolution: The XL13-346 dual indicator option for L9492 EL/EU, comes as a standard with Occupied/Vacant outside, and Locked/Unlocked inside. The indicators on XL13-346 are specific to these signs and they can...:

Does LCN offer any special shorter Standard EDA or 62G Shoes?

Resolution: LCN does offer some special shorter shoe's but depending on the application, the closer series, and the length of the shorter shoe the ST changes. Please contact closers_techprodsupport@allegi...:

Does Falcon have a listing of part numbers for the tailpieces available for the D100 and D200 series deadbolts?

Resolution: Please click here for the Falcon Deadbolt service manual, reference page 34 for the tailpiece chart.:

What is the new number for the discontinued LCN IP170 intermediate pivot?

Resolution: The IVES 7212 intermediate pivot replaced the LCN IP170.:

Does Allegion offer bittings to an end user to create their own key system?

Resolution: Allegion offers an organized listing of 4,096 bittings for a 6pin system, that can be used to create your own master key system. Other items that are included:DHI (Door Hardware Institute).&nb...: