Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What size drill bit do you need to use for LCN thru bolts?

Resolution: :

Does the 4010 have a solid hold open arm?

Resolution: ST-3496 is a special solid hold open arm for the 4010 closer. This is a handed arm and maximum reveal is 1/8".:

Does Steelcraft offer a sloped sill at window or sidelite frames.

Resolution: Sloped sills are not available from Steelcraft. :

Where can I find order forms for Steelcraft product?

Resolution: For Steelcraft Distributors only - Steelcraft order forms can be found online on the Allegion 360 Portal in the “Price Books" section.:

Will the 230L trim work with a 1-1/8" mortise cylinder

Resolution: The 230L cannot function with 1-1/8" mortise cylinder.The cylinder body should be 1 ¼" long (dimension B below - from faceplate to back of cam) to properly install and operate the locking component...:

What is the part number for the HL6-9095 spindle?

Resolution: The spindle for the HL6-9095 is part of the paddle assembly.HL6 9000RK-95 - PADDLES ONLY L9095NANASAME AS HL6-9000RK BUT SUBSTITUTE 840090 FOR 850036 BRACKET AND CAM ASSEMBLY, ADD 36-371 ...:

Can SOSS invisible hinges work with bi-fold doors?

Resolution: SOSS hinges can be used with in-swing and out-swing bi-fold doors. For bi-fold doors, SOSS hinges must be oriented in one direction at the frame and in the opposing direction at the joint of ...:

Does Ives offer replacement rubber bumpers for the WS404?

Resolution: Replacement Rubber Bumpers for the WS404 are not available.:

Is there a Miami Dade or Florida Building Code product approval for doors with louvers?

Resolution: Florida FBC product approval FL12400 covers doors with louvers both single and paired openings. Louvered doors are not approved under Miami Dade hurricane approvals.:

What is the control key combination for the Salesman Sample Sargent and Corbin Russwin LFIC?

Resolution: LOCKED DOWN TO TECHThe Salesman Sample Control key bitting for the Sargent LFIC and the Corbin Russwin LFIC is 321267.This combination can be cut on a regular operating blank to create a control ke...: