Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Does Falcon have a listing of part numbers for the tailpieces available for the D100 and D200 series deadbolts?

Resolution: Please click here for the Falcon Deadbolt service manual, reference page 34 for the tailpiece chart.:

What is the new number for the discontinued LCN IP170 intermediate pivot?

Resolution: The IVES 7212 intermediate pivot replaced the LCN IP170.:

Does Allegion offer bittings to an end user to create their own key system?

Resolution: Allegion offers an organized listing of 4,096 bittings for a 6pin system, that can be used to create your own master key system. Other items that are included:DHI (Door Hardware Institute).&nb...:

What size drill bit do you need to use for LCN thru bolts?

Resolution: :

Does the 4010 have a solid hold open arm?

Resolution: ST-3496 is a special solid hold open arm for the 4010 closer. This is a handed arm and maximum reveal is 1/8".:

Does Steelcraft offer a sloped sill at window or sidelite frames.

Resolution: Sloped sills are not available from Steelcraft. :

Where can I find order forms for Steelcraft product?

Resolution: For Steelcraft Distributors only - Steelcraft order forms can be found online on the Allegion 360 Portal in the “Price Books" section.:

Will the 230L trim work with a 1-1/8" mortise cylinder

Resolution: The 230L cannot function with 1-1/8" mortise cylinder.The cylinder body should be 1 ¼" long (dimension B below - from faceplate to back of cam) to properly install and operate the locking component...:

What is the part number for the HL6-9095 spindle?

Resolution: The spindle for the HL6-9095 is part of the paddle assembly.HL6 9000RK-95 - PADDLES ONLY L9095NANASAME AS HL6-9000RK BUT SUBSTITUTE 840090 FOR 850036 BRACKET AND CAM ASSEMBLY, ADD 36-371 ...:

Can SOSS invisible hinges work with bi-fold doors?

Resolution: SOSS hinges can be used with in-swing and out-swing bi-fold doors. For bi-fold doors, SOSS hinges must be oriented in one direction at the frame and in the opposing direction at the joint of ...: