Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What is the size of the PIM 400-485 enclosure?

Resolution: About 3" X 6 1/4" in a grey enclosure:

Is it possible to use an RX-LC switch with the CO-100 Series?

Resolution: It is not possible and not necessary to use an RX-LC switch with a CO-100 series lock.:

What type of wire connector is on the 900-BAT Battery Pack and 900-BB Battery Backup Board? F1 or F2?

Resolution: It is an F1 smaller width flat blade connector.:

Resolution: Models 679-05, 679-05WD, 679-05HM Door Position Switches for use with listed fire exit hardware and single point locks and latches, are rated up to and including 3 hrs.:

How do you disable the keypad output on the AD300 and AD400?

Resolution: To disable the keypad completely, set the keypad output mode to 1 using SUS.:

What is the part number for the Weatherproof 650/653 key switch cover?

Resolution: The part number is: P701660:

What face skins are available on the Republic DE series door?

Resolution: 18 gauge, 16 gauge, or 14 gauge (cold rolled steel or A60 galvannealed)G90 Galvanized available in 16 or 14 gauge only Stiffener Gauge – 20 gauge (Optional 18 or 16 gauge):

What type of bottom channel is available on the Republic DE series door?

Resolution: Bottom channel is an inverted 16 gauge steel channel, projection welded at a maximum of 2-1/2" on center:

What type of top chanel is available on the Republic DE series door?

Resolution: Top channel is a flush 16 gauge steel channel, projection welded at a maximum of 2-1/2" on center:

What cores are available for the Republic DE series doors?

Resolution: 1 lb. density Polystyrene (standard)/Optional 2 lb. Polyurethane core“U” Factor = 0.41/STC = 35“R” Factor = 2.43 (per ASTM C1363)Polyurethane Core“U” Factor = 0.39/STC = 33“R” Factor = 2.56 (per AS...: