Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
FAQs
«
1148
1149
1150
1151
1152
»
Question
Answer
Video: How to add cards to the stock list in Express
Resolution:
Video: How to add cards to the stock list in Express: Schlage Express - Adding Credentials to Stock List - YouTube:
Video: How to program a pass through PIN
Resolution:
Video: How to program a pass through PIN: Schlage CO-100, CO-200, AD-200 - Manually Program a Pass-Through PIN - YouTube:
Video: How to program a pass through credential
Resolution:
Video: How to program a pass through credential: Schlage CO-200, AD-200 - Manually Program a Pass-Through Credential - YouTube:
Are 40 and 50 functions available on the CO100 993?
Resolution:
The 40 and 50 functions are not available on the CO100-993S or 993M.:
Video: Manually programming a Freeze credential
Resolution:
Video: Manually programming a Freeze credential: Schlage CO-200, AD-200 - Manually Program a Freeze Credential - YouTube:
What is the Schlage equivalent to the Von Duprin 3215 cylinder?
Resolution:
The Von Duprin 3215 is equivalent to the Schlage conventional inverted cam cylinder 20-001 114 XQ11-949.Reorienting the Von Duprin 3215 cam will make it equivalent to the Schlage 20-001 114. :
What is the Schlage equivalent to the Von Duprin 3216 cylinder?
Resolution:
The Von Duprin 3216 Rim cylinder is equivalent to the Schlage conventional horizontal tailpiece Rim cylinder 20-022.:
Does the grommet that comes with the Glynn Johnson 100 series Hold open come in different finishes?
Resolution:
The grommet that comes with the Glynn Johnson 100 series hold open will always be brass. The knob that sits on the grommet will change with finish ordered:
Can the L9025 be purchased with an escutcheon?
Resolution:
The L9025 can be purchased with an escutcheon. :
Do FSIC mortise cams come with screws?
Resolution:
Mortise cams are ordered as the cam only, you should re-use the cam screw from the mortise cylinder.:
«
1148
1149
1150
1151
1152
»