Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Are solenoids or motors used in the Falcon MA series electrified mortise locks?

Resolution: The Falcon MA series electrified mortise locks use solenoids. :

Is the full size Everest check pin the same as the full size Everest 29 check pin?

Resolution: The 34-007 check pin is used for both Everest and Everest 29 full size cylinders and cores.:

Resolution: The ND40 is ADA compliant for the fact that it has a push button. If it had the push and turn button then it would not be ADA compliant. No pinch, no grasp is needed with this lockset.:

How to order the CS210 with 5" backset?

Resolution: Will need to order the lock as needed. Then specify the 16-484.CS210-B60P6D ACC 626 PLY RH 16-484 10-121 1 3/4" S123:

Does the ND80 need to be timed?

Resolution: The ND80 does not need to be timed.:

What are the dimensions of the Schlage FSIC mortise housing?

Resolution: Schlage's FSIC mortise housing dimensions are shown below: Face (flange) diameter - 1.375"Face (flange thickness - 0.140"Barrel diameter - 1.150"Housing length (front to back (including face, ...:

Does Falcon make a FSIC cylinder?

Resolution: Falcon only makes Conventional and SFIC cylinders.:

What cam is used for the Corbin russwin A01 cam?

Resolution: Corbin Russwin's ML2000 series A01 cam part numbers: Modular cylinder for:1-1/8, 1-3/8, 1-5/8 B520-7321-1/4, 1-1/2, 1-¾ B520-733F...:

Does Schlage make a KIL cylinder for PDQ locks?

Resolution: Schlage does not offer cylinders for PDQ locks.Schlage KIL cylinders may fit a PDQ lock but Schlage does not make a tailpiece to operate a PDQ lock.:

Can the electrified MA handing be changed?

Resolution: The Request to Exit (RX) on the MA851 or MA881 monitors both sides and does not require Rehanding.: