Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: Handing Design – Non-handed standard (Optional handed):

Does the Republic DL series door come standard with a universal hinge prep?

Resolution: Universal Standard/Heavy Weight Hinge – Hinge fillers are used allowing for easy modification from heavy to standard weight hinge prep:

What finish does the LCN 4840-460 Pneumatic Hinge come in?

Resolution: The 4840-460 Pneumatic Hinge comes in an Aluminum (689) finish.:

Can I bench test an LV9000 Mortise with Vandlgard trim?

Resolution: The Vandlgard lever trim uses unique mounting posts/ferrules that interact with parts inside the lock case. The lock won't operate correctly without the lever trim fully attached and mounted in a d...:

Is the whole rod on an Ives FB51 threaded?

Resolution: The standard rod that comes with the flush bolt for a 12" dimension (measured from the top/bottom of the door to the centerline of the faceplate) is only threaded on the ends.Therefore, that rod ca...:

When did LCN change the warranty on the 4000 Series closers from 10 years to 30 years?

Resolution: The LCN warranty, on the 4000 Series Mechanical closers, changed on March 3, 2014.For complete list of Allegion product warranty see below related resolution.:

Are the Schlage L-Series mortise locks compatible with the Von Duprin 98/9975 and the Falcon 25-M?

Resolution: The 98/9975 and 25-M devices work only with the Von Duprin 7500 and Falcon 8500 mortise locks, respectively. They cannot be used with L-Series mortise locks.:

Does Ives offer spring-loaded continuous hinges?

Resolution: Ives does not offer spring-loaded continuous hinge. The only spring-loaded hinge offered is the 3SP1 butt hinge.:

Why does my CO100 privacy function lock allow access even though the inside button was pressed?

Resolution: Make sure the DPS was correctly installed, check operation with a meter making sure the switch changes state when the door is opened and closed.:

What size mounting box is required for the 8310-810D?

Resolution: The 8310-810D mounts in a double gang box. You can use the LCN 8310-867F or 8310-867S and use the adapter plate that comes in the box with the actuator. You can also use a double gang box...: