Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can a 2030 be used on a 24" wide door hung on butt hinges?

Resolution: ST 0600 is for a 2030 series closer to be used on a 24” wide door, with door hung on hinges only. ST-0600 is a special track and templating. Based on the width of the door (24"):we recom...:

What are the thru bolt part numbers for L Locks with N escutcheon trim and indicator on the inside?

Resolution: Schlage L9000 series mortise locks with N Escutcheon trim used in conjunction with the Generation 2 (Gen2) indicator on the inside, the thru bolts are shorter than on the non-indicator N escu...:

What is intumescent?

Resolution: Intumescent refers to a material inside or attached to the neoprene of the Zero International seals. Intumescent material will expand with heat and increase in volume while decreasing in density.&n...:

Can you order L9000 MLR locks with DPS or DM?

Resolution: The L95xx and L96xx MLR functions cannot accommodate the DPS or DM switch due to the limited amount of space inside the lock case. :

Does a strike come with the CL100 and CL200 series cabinet locks?

Resolution: When the CL100PB is ordered as complete lock it comes with, bar strike, 3/4" x 1-31/32" x 1/2", CL10-355.When the CL200PB is ordered as complete lock it come with, bar strike, 3/4" x 1-31/32" x 1/4...:

Does all weather stripping come come with adhesive?

Resolution: No. Not all weather stripping has adhesive. If adhesive is needed, make sure the PSA option is available with the weather stripping being selected. :

What is an adjustable jamb applied seal?

Resolution: An adjustable jamb applied seal is a bar type seal with an adjustment screw that pushes the seal out further, or less to make sure the opening has no gaps on the edges. :

Is the 488S fire rated?

Resolution: The 488S is not fire rated, but the 488FS is. :

What is the maximum degree of opening you can template a 4040XP Cush closer?

Resolution: The 4040XP Cush closer can be templated for 85°, 90°, 100°, and 110° maximum as standard templates.The 4040XP if ordered by ST-3289 will allow templating to 135°The 4040XP if ordered by ST-3482 wil...:

How do you change the handing of CUSH and SCUSH arms?

Resolution: The handing of the CUSH, HCUSH, SCUSH, and SHCUSH arms can be changes by moving the stop/spring block form one side of the shoe to the other. The CUSH shoe stop requires a 5/16 hex wrench.The ...: