Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Does the Senior Swing need to be on a dedicated circuit?

Resolution: The Senior Swing line of automatic operators requires a dedicated circuit because any line noise could cause an issue with operation. :

What is the shipping weight of the 4631 and 4642 LCN Operators?

Resolution: The shipping weight of the LCN 4631 and 4642 is approximately 36lbs.:

Did LCN ever sell a 4040SED that was powered by a 9v battery?

Resolution: LCN did at one time offer a 4040SDB, which had a detector and was powered by a 9v battery. It was obsoleted in DEC of 97 and no replacement parts are available.:

Do we offer thin door spacer kits for the ND Indicator?

Resolution: The available thin door spacer kits will accommodate door ranges from 1-3/8" to 1-11/16" and are manufactured from Stainless Steel. They are available in 622 and 630 finish only.For a door thicknes...:

Is the ND Indicator handed?

Resolution: The ND Indicator is handed and can be changed in the field.Click here for the Interactive and PDF Installation instructions showing the steps for handing. The lock box lid also has printed ins...:

Where do I find Installation Instructions for the ND Indicator?

Resolution: Click here for the Interactive and PDF Installation instructions and the Troubleshooting Guide. :

Are the Flacon 8200 and LCN 9100 operator arms interchangeable?

Resolution: The 8200 Falcon operator does use the same arms as the Benchmark 9100 series, so the 8200 and 9100 arms are interchangeable. The 8240 Falcon does not have a long arm option but the 9140 Long will w...:

Are the 2810, 2850 and 2860 Center Pivot arms the same?

Resolution: The Center Pivot arms are the same across all 2800 series Senior Swing operators (2810, 2850, 2860).:

Is there a way to use a 4040XP cylinder in a 4000T pocket installation?

Resolution: The 4000T cylinder can be replaced by the 4040XP cylinder by using special template ST-2967.Spring power of the 4040XP cylinder needs to be set to properly close the door.:

Can you mount a Falcon SC71A pull side with swing clear hinges?

Resolution: The SC71A closer mounted pull side will work with swing clear hinges. You would just need to locate the closer and arm from the Center Line of the swing clear hinge pin. :