Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Does Von Duprin offer a mortise lock with levers on both sides?

Resolution: Von Duprin does not offer a mortise lock with levers on both sidesA Schlage L Series or Falcon MA Series are available options though. :

Will a QEL-L work with an RX switch?

Resolution: The QEL-L option comes standard with an RX switch to monitor the push pad of the exit device.With the standard QEL option, the push pad retracts every time the motor is engaged, so an RX switch wou...:

How long does the buzzer sound with a QEL-B option?

Resolution: The buzzer will only sound during the initial retraction. It will not continue to sound if the motor is held retracted for extended periods of time. :

Is There a Limit to the Number of Home Keys or Express Mode Access Users on the Schlage Encode Plus?

Resolution: No, there is currently no limit on the number of Home Keys or Express Mode Access Users for the Schlage Encode Plus (BE499). The number of Home Keys is controlled by the owner of the lock and ...:

Will any of the current Falcon trims work on the obsolete Falcon XX device?

Resolution: Unfortunately none of our current Falcon trims will work on the obsolete Falcon XX device. Your best bet would be moving to a Von Duprin 88 Series and using one of the retrofit plates we have...:

Can a fire-rated device be converted to a non-fire-rated device with dogging?

Resolution: Unfortunately you can't convert a fire-rated device to a non-fire-rated device. A component inside the pushpad (dogging rod extension) that is installed for non-fire-rated devices is NOT inst...:

What are the "lock on open" and "lock on close" device settings for a Pure Access Cloud access point?

Resolution: These settings modify the existing latch interval setting but will only operate when a door position sensor is installed and configured for the access point.- Lock on Open: After an approval or adm...:

In Pure Access Cloud, what is the "Schlage Compatibility Mode" setting in the IP Bridge "Edit Access Point" menu* for?

Resolution: This enables Schlage Mobile Access Credential compatibility for IP Bridge access points that are equipped with MTB readers.*This setting will only appear for IP Bridge access points in tenants that...:

How do Auto-unlock w/Badge events appear in Pure Access Cloud History reports?

Resolution: For Legacy Isonas devices (RC03, RC04 and IP Bridges), both the start* and the end events are "Badge Unlock" events attributed to "System Admin."*There should be a user attributed approval at the s...:

Does NDE require different springcage for Yale or Medeco?

Resolution: Yes, the NDE has a different springcage.Part number: N523-224 is needed for J YA7, J YA6, J MED: