Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Will the Von Duprin 6112 electric strike work with the Falcon 19 R?

Resolution: Yes, but the template shows the former Monarch 19 R device and the "deadlatching" cam may not be depressed fully when the latchbolt from the exit device is engaged into the electric strike pocket.&...:

How many Chexit devices can I operate from a PS902 power supply?

Resolution: Von Duprin only recommends operating one Chexit from the PS902. The 24 volts motor now pulls 1 amp at 24 volts DC so operating 2 Chexit devices at once might "max" out the power supply if pow...:

How do you convert the Falcon 912L trim to NL?

Resolution: The standard 912L trim (lock/unlock) can be converted by adding the NL spring (part number 600339) to the locking lever behind the cylinder cam on the trim. :

Are the KR mullion kits the same for Von Duprin and Falcon?

Resolution: Yes, the KR kits are the same for Von Duprin and Falcon steel mullions. There are NO KR kits for the aluminum mullions. :

What Falcon trim model was formerly called "Trident"?

Resolution: The model 920 trim was called "Trident" by the Monarch company.:

Does Schlage offer a cylinder cam for the Trilogy Dl12/Dl1300 Series?

Resolution: Schlage does not offer an equivalent replacement for the Alarm Lock HW1349 Schlage Standard Cam for use with the Trilogy Dl12/Dl1300 Series. See below for pictures of the&nbs...:

How do I order a Custom Coined Key from Schlage?

Resolution: As of June 25, 2022 Schlage has implemented specific keys by part number to be used when a custom coined key is needed. If a Coining Die does not currently exist one MUST be ord...:

Is the Schlage L9000 HSLR trim handed?

Resolution: All L9000 HSLR trims are handed and cannot be changed in the field.Handing must be specified when ordering. See the HSLR Data Sheet here for more detail...:

Are Schlage Modular Mortise and Rim Housing Screws the same regardless of Back Housing length?

Resolution: The same Modular Housing Screw, B520-693, is used on all Schlage Modular Mortise and Rim Cylinders regardless of Back Housing length. This screw is used to attach the Back Housing to the Front Hous...:

How long is the 4040XP-79ELR?

Resolution: The 4040XP-79ELR is 12 3/8".: