Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What is the part # for the Von Duprin ES 5547 Retrofit Kit?

Resolution: The 5547 series exit device can be used with an electric strike if the 050656-00: ES5547 TOP LATCH/ROD SERV KIT is used. :

Falcon Cross Bar XX not found in literature

Resolution: The XX Series crossbar exit device is obsolete. The recommended replacement is the Von Duprin 88 series. Von Duprin offers retrofit cover plates for that conversion (reference Von Duprin 88 Retrofi...:

Why is my TWP narrower than my XY hinge?

Resolution: The TWP is a standard size across the board on continuous hinges.:

Is the material thickness of the 112HD thinner than the 224HD?

Resolution: No, they are both the same gauge.:

Is the Zero Z953 cam lift hinge available in customer sizes?

Resolution: No, it is only available in 4.5" X 4.5" size.:

What is the recommended tightening torque for the 4600 arm screw,?

Resolution: The recommended tightening torque is 75-100 in-lbs. :

What keyways are available in the Everest 29 S keyway family?

Resolution: Everest 29 S is a patent protected keyway family from Schlage. It is an open keyway which means there are no restrictions or requirements (such as a letter of authorization) for purchasing....:

What is the XB03-330?

Resolution: The part number XB03-330 is added to B250 locks when ordering for door thickness range of 2-3/4" to 5-9/16". Specify door thickness. XB03-330 is not available as a separate pa...:

Is the 375L trim plate available as a service item?

Resolution: The 375L trim plate is not available as a service item. If the trim plate must be replaced, then a new 375L trim is necessary.:

Are 900 Series option boards (i.e. 900-2RS or 900-4RL) compatible with PS873 power supplies?

Resolution: 900 Series option boards are not compatible with PS873 power supplies. They should only be used with PS902, PS904, PS906, and/or PS914 power supplies.: