Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: The L583-489 was a concept design cam for the Schlage FSIC mortise housing. Although the L583-489 was in the pricebook in 2008, there was a delay in the release of the cam (L583-489) and the retain...:

How can I tell if I have a ALX or ND series lock on my door?

Resolution: :

L9000 HSLR dimensions of the trim and various significant hole locations.

Resolution: The centerline of the thumbturn opening to the top of the L9000 HSLR trim is 4.219" The centerline of the thumbturn opening to the bottom of the L9000 HSLR trim is 8.948" :

What do I need to order to convert a KR4954 to KR4854 mullion?

Resolution: The KR4954 has the same mullion body and most of the same KR kit parts as a KR4854 mullion. However, the KR4854 uses the fire rated (9854/9954) top fitting components. So these top fitt...:

What is the Schlage or Falcon equivalent to the Corbin Russwin A02 cam?

Resolution: The Corbin Russwin A02 cam is the same as the BEST 30 Latch function cam or the Schlage and Falcon straight cams.:

What is the amp draw on the black and white wires on the P6 or P7 activation cables on the Sr Swing operator?

Resolution: On the STD Sr Swing control box (shipped Dec. 8th, 2019 or before) label on control box will have 710164-00 - 24vac (STD) - draw is 1.5 A On the HD Sr S...:

What mounting posts are used with SL1 x SK1 trim?

Resolution: When SL1 (lever) or SK1(knob) trim are specified with a lock, the mounting post (ferrule) supplied depends on which (knob or lever) is on the outside.Knob outside, lever inside: (2) L583-212 mounti...:

Can you convert a 360L to an E360L?

Resolution: No, the electric components may not be field-added to a mechanical trim. A new E360L-BE control must be ordered from the factory.:

Are the drive in latches used the "A" and "AL" series UL listed?

Resolution: The Drive in latches 11-110, 11-113, 11-104, and 11-105 used on the "A" and "AL" will NOT be UL listed. :

What strike is required for the Von Duprin 98/9927F LBR device?

Resolution: What strike is required for the Von Duprin 98/9927F LBR device?The 499F strike is required when using the Von Duprin 98/9927F LBR device. :