Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: The extension rods are all threaded, so they can be cut down.The standard 12" rod is not fully threaded and would not be able to be cut. The turning of the bolt is the fine adjustment. Plea...:

When ordering a CON-QEL device, what is the length of wire from the motor with male connector end?

Resolution: The cable will be about 5-6" long. The CON cable is the EL 6' wiring cable basically cut down to about 5-6", with crimped pins on the ends and a loose CON plug in the bag. :

Can a "Adjusta-Studs " be used with a 700 hinge, or is it just for use with a 705 hinge, per the bottom of page A26 of catalog?

Resolution: The Adjusta Studs are used when the frame is not true and plumb. The 705 also has the overlapping metal edges to hide the odd an uneven gaps that make adjustastuds necessary. :

What does MSLA mean for a Zero threshold?

Resolution: MSLA is optional mounting hardware for thresholds. MSLA-10 (also called #223) is a 10-24 machine screw with anchor. MSLA-4 (also called #224) is a 1/4-20 machine screw with anchor. ...:

Are there extended lip faceplates for the 4200 electric strike?

Resolution: No.The strike is shipped with 2 standard faceplates, and strike opening inserts, for multiple mortise lock and cylindrical lock applications.:

Can cylinder dogging (CD) be added as a kit to the motorized CXA Chexit?

Resolution: No, there is no kit to add Cylinder Dogging (CD) to an existing Chexit (CX) regardless of new or old design. CD CX or special Center Case Dogging (SD) for the current C...:

How do you convert an EL to a QEL device?

Resolution: If you have an EL device currently, you would need to order a QEL conversion kit. A common question is whether the EL parts can be removed and just replaced with a motor. That an...:

What is the part number of the replacement rubber stop for IVES FS 153?

Resolution: FSPART.1060 :

Do we have HHYKK1690 strikes that we supply to YKK?

Resolution: Catalog Number: YKK-HH-1690-EO-US26D-36"-7'-RHR-YKK-HEX-HSEC-1 3/4"HMD-HMF :

How do you measure sleep current on a Control lock (BE467 / FE410)?

Resolution: To check the sleep current on a control lock: 1) Remove the inside escutcheon to expose the batteries 2) Slightly remove the top of the battery to disconnect the power to the l...: