Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What size are the Senior Swing (IQ) filler plate screws?

Resolution: The legacy Sr Swing and Swing IQ filler plates (XXXX-12) and spindle plates (XXXX-11A or 11B) mounting screw size is 8-32 X ¼". It is a Phillips, flat head machine screw. :

What is a Yale LFIC core?

Resolution: LOCKED DOWN TO TECH**See attached bulletin regarding what the Yale LFIC is and who can purchase / order. Any concerns or issues reach out to Steve Couch or Ryan Myer.https://allegion.sh...:

What is the purpose of the dummy cylinder used on the TM561?

Resolution: The TM561 is using the same chassis as the double cylinder functions. Instead of an inside cylinder that can operate the inside key cam, the dummy cylinder holds the inside key cam in a fixed posit...:

Can the Schalge HL6 be used with a 98/9927?

Resolution: The Schlage (formerly Glynn-Johnson) HL6 can be ordered as a trim with the Von Duprin 98/9975 Mortise Exit Device only.The HL6 is not compatible with other models in the 98/99 Series nor other Von ...:

What lever designs are available with the MER (Merano) rose on the Schlage L9000 Series mortise lock?

Resolution: The MER rose is only available with the MER lever style. The MER lever can be specified with A, B, C or the MER rose and the L or N Escutcheon.:

What lever designs are available with the AVA rose on the Schlage L9000 Series mortise lock?

Resolution: The AVA rose is only available with the AST (Asti) lever style. The AST lever can be specified with A, B, C or the AVA rose and the L or N Escutcheon.:

What is the RX mounting screw size for Schlage ND series?

Resolution: The ND series RX switch mounting screw is a 0.05" socket cap screw.#2-56 UNC-3A x .375" :

What is the RX mounting screw size for the Falcon TM series?

Resolution: The Falcon TM series RX mounting screw is a M2 x 0.4mm x .393" (25/64") Phillips pan head (#1 drive).:

What is the RX mounting screw size for the Schlage PC series?

Resolution: The Schlage PC series RX mounting screw is a M2 x 0.4mm x .393" (25/64") Phillips pan head (#1 drive).:

Can an ALX50 or ALX53 be field modified to perform as an ALX80?

Resolution: An ALX50/53 can be set up to perform as an ALX80 by locking the chassis (by pushing in the plunger) and swapping the lever for a closed lever.It will be necassary to remove the button to fit the le...: