Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Is there a part number for the spacer plates for the WS-T application

Resolution: The WS-T Spacer Kit contains the Top Latch Spacer plate and 2 each Rod Guide Spacers used with WS-T devices.This Kit is available as a special order item at this time (April 2026).YKIT.60553 ...:

Is there a difference between L9453WP and L9453?

Resolution: The L9453 and L9453WP are the same lock.:

Can the Falcon TM series be specified to accept a 6-pin Kaba Peaks KIL cylinder?

Resolution: Yes. The TM series can be specified to accept a 6-pin Kaba Peaks KIL cylinder (L-PK6).:

Can the Falcon TM series be specified to accept a 6-pin ASSA KIL cylinder?

Resolution: Yes. The TM series can be specified to accept a 6-pin ASSA KIL cylinder (L-AS6).:

Can the Falcon TM series be specified to accept a 6-pin Corbin Russwin KIL cylinder?

Resolution: Yes. The TM series can be specified to accept a 6-pin Corbin Russwin LFIC core (J-CO6) or a 7-pin Corbin Russwin LFIC core (J-CO7).:

Can the Falcon TM series be specified to accept a 6-pin Sargent KIL cylinder?

Resolution: Yes the Falcon TM series can be specified to accept a 6-pin Sargent LFIC core (J-SAR).:

Can the L9066 Schlage mortise lock be ordered with an indicator?

Resolution: Locked down to Tech The L9066 function is not available for ordering with an indicator. You can order indicators separately and add to the L9066 in the field. Please contact Mechanic...:

Is the retainer for the B580 available as a separate item?

Resolution: Locked down to Tech SupportThe part number for the retainer is: B520-679. It is not available as a separate part. :

Can only push or pull handle assemblies be installed on both sides of the door on the Schlage HL6 tubular lock?

Resolution: The push or pull paddle assemblies cannot be installed on both sides of the door.:

Opening Force of Legacy Swing vs Swing IQ with Power Assist?

Resolution: Opening Force of the Legacy Swing was approximately 10-12lbs depending on the variables and settings and the new Swing IQ opening force with Power Assist turned “on” is approximately 10lbs of force...: