Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

How to remove the Falcon T series IC lever.

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. To remove the Falcon T series lever when prepped for other manufacturers FSIC or LFIC lever, yo...:

What is the Falcon big red punch?

Resolution: Falcon previously made a large red key punch similar to Best’s red punch. Since it is no longer manufactured, the blue SFIC punch is now used.:

Can SOSS Barrel Hinges be used in a load bearing applications?

Resolution: SOSS Barrel Hinges should not be used in vertical or load bearing applications. The linkage cannot support weight. Affected models: BH085, BH104, BH124, BH144, BH164, BH184, BH244:

Does Falcon offer an FA1 keyway?

Resolution: The FA1 (Ilco 1054WC) keyway is equivalent to the Falcon E 5-pin keyway:

Can the LM9300 be ordered less bottom or top latch?

Resolution: This lockset cannot be ordered less top or bottom latches as this lockset is designed to use all 3 latches.:

Can the CS210/H2101 lockset be ordered less outside lever?

Resolution: This locksets outside lever is attached to the lock chassis. There is no way to build this lockset less the outside or inside levers.:

Are the Republic Steel Stiffened Doors handed?

Resolution: Non-handed standard (Optional handed):

Do Republic Steel Stiffened Doors come standard with a universal hinge prep?

Resolution: Universal Standard/Heavy Weight Hinge: Hinge fillers are used allowing for easy modification from standard to heavy weight hinge prep:

Are instructions available for the 1490 and 1590 adapter plates?

Resolution: Instructions are in development but not available presently.:

Does Falcon offer a double door strike for use with the 20-R device?

Resolution: Currently, there is no double door strike available for use with the Falcon 20-R device.: