Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What thickness is available for Republic Steel Stiffened Doors?

Resolution: Door Thickness: 1-3/4" (14 gauge = 1-13/16"):

Resolution: The Swing IQ-18 mounting plate, when used in the installation of a Swing IQ surface mount operator, should always be ordered 3-3/4” longer than the specified Door Opening Width (DOW) used when orde...:

What hinge edge reinforcements are available for the Republic Steel Stiffened Doors?

Resolution: Hinge Rail and Reinforcement: Hinge edge is non-beveled and reinforced with a continuous 16 gauge steel channel projection welded at a maximum of 5" on center. (Optional 10 gauge):

What lock edge reinforcements are available for Republic DE series door? What type of edge seam is available on Republic Steel Stiffened Doors?

Resolution: Lock Rail: Lock edge is non-beveled and reinforced with a continuous 16 gauge steel channel projection welded at a maximum of 5" on center. (Optional 14 gauge) (Beveled 1/8" in 2" optional):

What type of edge seam is available on Republic Steel Stiffened Doors?

Resolution: Visible seam (standard), continuously welded seamless or intermittently welded seamless available.:

What cores are available for Republic Steel Stiffened Doors?

Resolution: Stiffener Gauge: 20 gauge (Optional 18 or 16 gauge) Stiffener Spacing: 6" maximum apart (Varies according to door width) Core: Fiberglass batting between each stiffener − “U” Factor = 0.61 − “R” Fa...:

What type of top channel is available on Republic Steel Stiffened Doors?

Resolution: Top channel is a flush 16 gauge steel channel, projection welded at a maximum of 2-1/2" on center:

What is the Swing IQ motor gearbox horsepower rated at?

Resolution: The motor gearbox motor is rated at 1/8 HP.:

Are the Dexter C1000 and C2000 available as Master Keyed?

Resolution: The Dexter C1000 and C2000 product is not available to order as Master Keyed. It is only available as Keyed Different (KD).:

What cylinder length is required for Gen 2 indicators?

Resolution: Gen 2 Indicator MUST be used with 1-1/8" cylinder length for standard 1-¾" door.: