Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

How thick is the shim that comes with the 6300 Electric Strike?

Resolution: The shim provided with the 6300 Electric Strike is 1/16" thick.Using this shim allows the ¾" tall 6300 to replace a 13/16" tall 299 strike, used for panic rated single or double doors, or a 299F st...:

Is the Pulse Width Module (PWM) or Potted Circuit Breaker (PCB) still available for the solenoid driven EL devices?

Resolution: The Pulse Width Module (PWM) used in the solenoid driven Electric Latch Retraction (EL) devices previously manufactured by Von Duprin and Falcon (including Doromatic) is still available as 050534-0...:

Can the LCN 6440XP be used with safety sensors?

Resolution: The 6440XP cannot be used with any type of safety sensors. This includes the LZR, 8310-804 and 8310-877.:

When ordering the ALX lock less cylinder will it come with a tailpiece?

Resolution: The Schlage ALX is shipped with a driver/tailpiece when ordered with a LD, BD, or JD suffix.:

What material is the Gen2 indicator spindle and cam made out of?

Resolution: :

Is the LCN restroom kit E Strike UL listed?

Resolution: Visible to Product Support Only.The LCN Restroom Kit E Strike is listed under UL 1034 & UL 294.Engineering confirmed that this E Strike is multi listed with Supplier.:

Does the LCN 8310-859 remote work on the 8310-804 DMSS sensors?

Resolution: The 8310-859 remote is not needed and will not work on the 8310-804 DMSS sensors. The 8310-804 sensors have manual adjustments only.For the 8310-804 instructions see here.:

Is there a rebox kit available for LCN closers?

Resolution: LCN offers rebox kits for most closers. Each rebox kit includes the box and instruction sheet for the closer.Specify the arm type to receive the appropriate instruction sheet with your Rebox Kit.Ex...:

What housing is needed on a Von Duprin 99 device with the 2SI Indicator kit?

Resolution: For the inside it will use a rim housing with a vertical tailpiece. For the outside lever, it's a rim cylinder as well, but tailpiece orientation doesn't matter:

What is the screw pack part number for the Falcon W series with levers?

Resolution: See below for the Screw pack part number for the Falcon W series.Q330-170 – Screw pack for leversQ005-085 – Screw pack for knobsQ330-182 – Screw pack for dummy trimQ330-179 – Screw pack for small r...: