Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
FAQs
«
1209
1210
1211
1212
1213
»
Question
Answer
Can you reorient the magnet on the Locknetics MG1200 maglock?
Resolution:
The magnet on the Locknetics MG1200 cannot be reoriented like some of our other maglocks such as the M400 series.:
Can you emulate apartment mode in demo mode?
Resolution:
You cannot emulate apartment mode in Demo mode, that function is only controlled by an access control panel. All you would be able to do is see if a credential presentation unlocks the door a...:
Can a PIM400-485 and a PIM400-TD2 both enable an IPB inside push button on an AD400?
Resolution:
The PIM400-485 will support the function of the inside pushbutton (IPB), however the PIM400-TD2 will not.:
What replaced the old Dor-O-matic junior swing operator?
Resolution:
There is no direct replacement for the obsolete Dor-O-Matic junior swing. The benchmark operator, 9130/9140, replaced the junior swing but it is not a direct replacement as the mounting footprint/w...:
What is exterior mode on the 4600 operators?
Resolution:
Exterior mode is a feature on the 4600 auto-equalizer that allows the operator to re-attempt opening after sensing an obstruction such as wind.:
Is the Falcon 8200 operator available in matte black finish?
Resolution:
The Falcon 8200 operator is not available in Matte Black finish (622).:
Can a 1260, mounted pull side, work with a concealed overhead stop?
Resolution:
The LCN 1260, mounted pull (hinge) side, can work with a concealed overhead stop, such as the GJ100, by using ST-2850. ST-2850 requires the 1260-18 drop plate, which must be order separately....:
What are the dimensions of the LCN 8310-824 Transformer?
Resolution:
The 8310-824 Transformer is 4” x 3” x 3”.:
What is the dimensional size of the 4600 operator?
Resolution:
The 4640/30 auto operator is 33 1/2” X 4 3/8” X 5 3/16”.:
Will the LCN 3130 work on a 20" door leaf?
Resolution:
ST-1103 would be needed to use the LCN 3130 series closer on a 20” wide door. This ST uses a special track and special templating. 3131 closer will not me...:
«
1209
1210
1211
1212
1213
»