Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: Linking an AD400 to a PIM400-485: Schlage AD-400 with PIM-400-485 - Linking Process (youtube.com):

Manually programming a programming credential

Resolution: Manually programming a programming credential: Schlage CO-200, AD-200 - Manually Programming a New Programming Credential (youtube.com):

Does the OEM2000 support RS-485?

Resolution: Yes, the OEM2000 supports RS-485.:

Can an older MT reader read EV3?

Resolution: In general, if it can read EV1 then it will read EV3, but we recommend rev23 or higher on MT readers for best EV3 response.:

When using the Yale FSIC with L9000, which cam to use?

Resolution: Use the L583-197 for the Yale 2196 housing to work with the L/LV 9000 series locks.:

Are the stop pins for the 653 Key Switch available by themselves?

Resolution: The stop pins only come in part pack P653062, so they are not available separately.:

What reader replaced the XF1100?

Resolution: The XceedID XF1100 reader was replaced by the Schlage MT-11 reader. :

How to Change the Battery on Schlage Keypad and Touch Locks

Resolution: Replacing the battery in your Schlage BE365 Keypad Lock is an essential part of maintaining its reliable operation. It’s recommended to replace the battery at the same time each year that you test ...:

Schlage BE365 Lock – Knob Spins but Does Not Retract the Bolt

Resolution: If your Schlage BE365 Keypad Lock is not unlocking after entering the correct code, and the green Schlage Button flashes to indicate success, but the knob spins freely without retracting the bolt, ...:

What size wrench is required to adjust the hold open force on an LCN SE track?

Resolution: 3/32 hex wrench :