Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Where can I find information on Allegion products that meet Build America Buy American Act (BABAA)?

Resolution: BABAA requires that certain FEMA award recipients and subrecipients comply with the following domestic preference requirements:1. All iron and steel items used in the project...:

How does the indicator trim operate on the ND55 Entrance Lock with Automatic Unlocking?

Resolution: ND55 Entrance Lock with Automatic Unlocking Engaging the push button will lock the outside lever and activate the outside indicator trim to read either Occupied or Locked. When locked by ...:

How does the indicator trim operate on the ND73 Corridor Lock?

Resolution: ND73 Corridor Lock Engaging the push button or rotating key in outside lever will lock the outside lever and activate the outside indicator trim to read either Occupied or Locked. When lo...:

How does the indicator trim operate on the ND78 Classroom Security Lock?

Resolution: ND78 Classroom Security LockOutside Lever is locked by rotating key in either lever 180 degrees counterclockwise, then returning to start position. Inside Indicator trim inside will read Locked.Out...:

How does the indicator trim operate on the ND92 Vandlgard Entrance Lock?

Resolution: ND92 Vandlgard Entrance LockEngaging the push button or pushing and turning the button will lock the outside lever and activate the indicator trim to read either Occupied or Locked. Key outside doe...:

How does the indicator trim operate on the ND98 Vandlgard Classroom Security Lock?

Resolution: ND98 Vandlgard Classroom Security LockOutside Lever is locked by rotating key in either lever 180 degrees counterclockwise, then returning to start position. Vandlgard allows the outside lever to r...:

Can the L9000 MLR functions be ordered with indicator?

Resolution: The L9000 MLR functions cannot be paired with an indicator because there is no thumb turn hub inside the lock case. :

How do I setup my L9000 MLR function to hold the latch after being retracted?

Resolution: All L9000 MLR functions are designed to release the latch immediately after latch retraction. Users must configure the control system to keep the latch in the retracted state for the desired duration.:

Is there a hold open option for the 4510T or 4210T closers?

Resolution: The 4210T and 4510T closers are a High Security closers that are not available with a hold open option or with a Bumper option in the track.This is because the hold open clip and/or bumper are remo...:

What is the part number for the ND HSLR screw pack?

Resolution: The HSLR screw pack can be ordered under part number N123-120 x 630. :