Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Do you need to install the Alignment cylinder on the Gen 2 indicators?

Resolution: The Alignment cylinder is required to be installed so the spindle is not taking the weight of the indicator by aligning up the indicator with the spindle. Binding will be apparent if the alig...:

What is the peak amperage for the L9000 MLR?

Resolution: L9000 MLR - Max current 1.4 ampsL9000 MLR w/ lever control - Max current 0.4 amps:

Why does the Falcon W581 storeroom function chassis have a push button?

Resolution: The Falcon W581 Storeroom lock utilizes the same chassis as the Falcon W501, W511, and W571. When the W581 lock ships, it has a visible button on the inside chassis spindle. The way sto...:

Are RX and RX-2 options available for Von Duprin 2-foot devices?

Resolution: Electrical options that occupy the space between the end cap and the push pad of the device are not allowed on the 2' sized 98/99 or 33A/35A Surface or Concealed Vertical Exit Devices.The RX, RX-2,...:

Can the Falcon MA mortise lock be used on a door with Government 86 prep?

Resolution: Government 86 door prep (oval cut-out) does not accommodate the Falcon MA mortise lock with either rose or escutcheon trim. :

Does alarm out on a M490DEP work as the alarm instead of the piezo alarm, or does it work with the piezo alarm, and do all the same alarms signal?

Resolution: The Alarm out well work with and goes off with everything the piezo alarm does, except the nuisance alert.:

When is it ok to wire a home run instead of a Daisy chain for AD300s?

Resolution: When using a Mux board approved by CBORD (MUX8) it would be ok to home run the wiring. It splits the data properly. A mux is like a network switch that sorts out all the locks, but this would be su...:

What material are the Falcon SC series closer drop plates made of?

Resolution: The drop plates for all the Falcon door closers are made of steel. :

What sizes are available for Republic SE series frames?

Resolution: Sticks are manufactured in 10'3" maximum lengths. Other lengths are available. Consult factory.:

What closer reinforcement is available for Republic SE series frames?

Resolution: Closer Reinforcement (Optional) – 1-3/8" x 14" x 14 gauge plate: