Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can a Schlage cylinder have both Visual Key Control and Concealed Key Control stamping?

Resolution: Schlage does not offer cylinder stamping on both the face (Visual Key Control - VKC) and the side (Concealed Key Control - CKC). It is physically possible to have stamping on both the face an...:

What is the maximum candela for the 1910 horn strobe light?

Resolution: 115 Candela:

Are the mounting tabs for the CS450 and CS750 the same?

Resolution: Yes, they use the same mounting tabs.:

Can you convert an M490 to an M490P?

Resolution: Not fully or officially. But you could swap out the armature for one with magnets and install the PCB assembly from the M490P. This would allow you to DSM but not MBS.:

What size security screws come with the MT Series readers?

Resolution: The MT Series Readers use T10 Security Torx screws. Remove/install with a T10 Torx bit or T10 screwdriver.:

Can the M490G be used with a delayed egress controller for an outside installation?

Resolution: Yes, the M490G can be used with a delayed egress controller. Make sure you have all the additional necessary items such as a delayed egress trigger and visual and audible indic...:

What are the endcaps of the TB-36 made of?

Resolution: The TB-36 Endcaps are made from black plastic.:

Can an AD993DT lock be converted to an AD993R lock?

Resolution: No, the AD993DT dummy trim is just a hollow shell, there are no mechanical parts inside.:

On Schlage ND and ALX locks, do the cylinders come pre-installed in the lock or loose in the box?

Resolution: On Schlage cylindrical locks including the ND and ALX, the cylinder comes pre-installed in the outside lever, and the factory checks functionality with the key. For double cylinder functions,...:

Are the 416 wood clip sets for the 2030 and 6030 the same?

Resolution: The 416 wood clip sets for the 2030 and the 6030 are different and not interchangeable.: