Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: Part number 47492315 is the Full-Size Cylinder Sales Kit. Click here for the 47492315 kit's contents. Refer to the latest Commercial price book for pricing. :

How is the L9485 XL11-557 Prison Lock handed?

Resolution: The L9485 XL11-557 Prison Lock is handed the opposite of a standard L-Lock chassis.For RH and RHR the catch screw will be on the lock case cover side.For LH LHR the catch screw will be on the lock ...:

When ordering an ND lock with indicator for a reverse hand how should it be ordered?

Resolution: When ordering an ND lock with indicator for a reverse handed door it should be ordered as RH for RHR and LH for LHR. :

Are the Electrified ND locks available with the latch monitor option?

Resolution: The ND12EU/EL,ND80EU/EL and ND96EU/EL locks are available with RX only. :

What finishes are available on the 6440 Compact operator?

Resolution: The LCN 6440XP Operator is available in two standard powder coat finishes, 689 Aluminum and 695 Dark Bronze.:

Are the LCN 8310 plastic actuator mounting boxes Fire Rated?

Resolution: The plastic actuator mounting boxes have not been tested for fire rating and therefore are not considered fire rated. When installing a switch, a licensed electrician has techniques to install devi...:

Is the 1460-18PA and the 1460T-18PA the same drop plate?

Resolution: The 1460-18PA and the 1460T-18PA are the same drop plates and could be used for parallel arm mounts, as well as track arm stop face (push side) mounting as long as you follow the proper template fo...:

What does SRT stand for on LCN screws?

Resolution: SRT means – Self Reaming & Tapping – these screws only need a pilot hole drilled, and will ream and tap the screw threading while being installed. SRT screws are not recommended wh...:

Does LCN have a thumb turn hold open type door closer?

Resolution: LCN has the HCUSH or SHCUSH arm styles that have a thumb turn hold open. Both arm styles are parallel arm push side application only:

What closer meets ANSI 156.4, PT-4G code?

Resolution: PT-4G stands for a closer with built in dead stop which would be an LCN door closer with a CUSH style arm.LCN catalog information ANSI 156.4 code reference.: