Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: A SOSS hinge can be used with a 5010 closer. Take installation measurements from the apparent centerline of the pivot point of the hinge, which will be very close to the standard butt hinge i...:

When ordering an LCN Door closer in a plated finish, what parts of the closer are plated?

Resolution: The arm, cover, and screw heads will be plated.:

What parts are supplied with the HL6-9000RK?

Resolution: The Schlage HL6-9000 locks have two trim pack options: HL6-9000RK and ** HL6-9000RK-95 **.These trim packs come with mortise paddle assemblies, covers and parts needed to install; parts included in...:

Can the M996L convert to the NL function?

Resolution: The cylinder in the M996L trim always operates in a night latch function.The electric motor locks/unlocks the lever while the key retracts the latch momentarily to allow entry as a mechanical backup..:

What is the thread size of the wood screws in a 4040XP WMS screw pack?

Resolution: The wood screws provided in the standard WMS screw pack for the 4040XP and 4110 closer is a #14 wood screw. :

Will the 912L work with the old monarch 19 device?

Resolution: Yes it will.:

What kind of material is the 7900 control box made of?

Resolution: The control box is made of 16 gauge gray painted steel.:

When did the Sr Swing control box get updated from AC power out for accessories to DC?

Resolution: The Sr Swing control box was updated from a 1.5A AC power output to 1A DC power out for accessories on December 9th 2019.The old version of the 8 wire P10 accessory cable had 2 white wires, the new...:

Is there any ST's for using a 4050A regular with PA arm (PA or pull side mounted) with wide throw hinges to get 180 degree door swing?

Resolution: Unfortunately, LCN currently does not have any Special Templates for using the 4050A closer (PA or pull side mount) with wide throw hinges to get a 180 degree door swing.For PA mount - Soluti...:

Where on the door does the M490DE Signage get placed, is there Fire Marshall approved measurements?

Resolution: This information would come only from the local Fire Marshall specific to each area. It will vary by juristiction.: