Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

How can I determine the size (21" vs 24") of a 2390 device?

Resolution: To determine the size of a 2390 device, measure only the pushbar assembly which is the material between the sloped end caps on each side of the device.:

Video: Manually adding a credential into Schlage Express

Resolution: Video: Manually adding a credential into Schlage ExpressSchlage Express - Manually Enrolling a Credential - YouTube:

Video: Enrolling a credential using the CRP2

Resolution: Video: Enrolling a credential using the CRP2Schlage Express - Enrolling Credential by Presentation using CRP2 - YouTube :

Video: Enrolling a credential using the MT20

Resolution: Video: Enrolling a credential using the MT20Schlage Express - Enrolling Credential by Presentation using MT20 Reader - YouTube:

Can the latch for the S series be used on the CS200?

Resolution: The following latch part numbers can be used on the S200 discontinued lock series. No warranty or UL is implied when using these as replacement options. 16-203 1x2 1/4 Square corner adjustable...:

When do you say "yes" on the flush transom option in the configuator

Resolution: :

How to Pair my Lock with RemoteLock

Resolution: All Schlage Encode locks (models BE489, BE499, and FE789) are compatible with RemoteLock. To enable this compatibility, the lock must first be paired through the Schlage Home app.Steps to Pair Your...:

Will the Ives dust proof strikes work with a Von Duprin device.

Resolution: Allegion Exit Devices have not been tested with Dust Proof Strikes.Using a Dust Proof Strike with an Exit Device is not tested nor supported and would void the Exit Device UL listings (Panic Hardwa...:

How to convert the ND80 to the ND50?

Resolution: To convert the ND80 to the ND50 you will need to change these parts.Spring Cage Outside: N523-218Chassis: S00031721097-KITInside Lever: 03-233 [design] [finish]Plunger Bar Assembly: N123-086Push Bu...:

What mortise cam is used on the AD5000 series locks by AD Systems?

Resolution: AD systems 5000 series mortise uses the Falcon A20069-000-00 conventional cam or the A12667-011-00 IC cam.: