Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Are any Ives hinges available less the Ives trademark?

Resolution: Ives butt hinges are available less trademark but have an approximate lead time of 3-6 months.Ives continuous hinges are not available less trademark.:

Is there a thru-bolt mounting option for Ives full-surface aluminum geared continuous hinges?

Resolution: The standard (STD) screw pack for Ives full-surface continuous hinges contains matching thru-bolts.:

Are Ives flush pulls fire-rated?

Resolution: Ives flush pulls do not have a fire rating.:

Can a dustless strike be used with the 3547A device?

Resolution: if the exit device is fire-rated, the strike supplied with the device must be used to maintain the fire rating.if the exit device is panic-rated, it would not be recommended since it has not been t...:

Can an HSLR anti-ligature lever be used with an 98 device?

Resolution: Von Duprin does not iffer an anti-ligature lever for our exit devices:

What is the length of the Schlage SFIC rim cylinder bar?

Resolution: The Schlage SFIC rim cylinder tailpiece length is 2.368" - 2.388".:

What is the part number for Fail Secure slider for the 6211 strike?

Resolution: FSE Slider (Models 6211WF/6212WF/6221/6223) #090591.FSE Slider (All 6100 and 6200 Series models except 6211WF/6212WF/6221/6223) #090798.See FS/FSE Conversion - Note that the instructions refe...:

What strike is used with the ND series on a 1-3/4" door with a overlapping astragal?

Resolution: The XQ07-351 078 (7/8" flat lip strike) would be used for ALX or ND series on a 1-¾" door with an overlapping astragal.:

What strike is used with the L9000 series on a 1-3/4" door with an overlapping astragal?

Resolution: The 10-072 078 (7/8" flat lip) strike is used with the L9000 series on a 1-¾" door with an overlapping astragal.:

How do you order LCN finish samples?

Resolution: LCN finish samples can be ordered. Please refer to the below for the recommended parts to order per type of finish desired. Current pricing applies. Contact your local Allegion Sales Office o...: