Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: Vivint is not an official Schlage partner, which means compatibility or full functionality cannot be guaranteed. For more information about Schlage partners, please click here.:

Does LCN have a closer certified for a Class1 division 1 rated applications?

Resolution: A class1 division 1 is for applications where there is explosive gases or vapors and LCN does not have any closers, or holders or operators that are certified to the class1 division1 ratings.:

Can Republic frames be insulated?

Resolution: Yes, there are specific application where Republic frames can and should be insulated such as our STC frames which must be fully grouted or filled with sound deadening insulation (fiberglass batting):

How do I properly hand Republic communicating frames?

Resolution: Helpful information for handing communicating frames is found on the iDigHardware site here: https://idighardware.com/2018/03/wwyd-handing-for-communicating-doors/ :

Where can I find a copy of the warranty for Republic Doors and Frames?

Resolution: The Republic Doors and Frames warranty is found in the Allegion Commercial Warranty document found here: https://us.allegion.com/en/resources/resource-library/document-library/allegion-documents.ht...:

How do you prep a 3130 concealed closer for a door wider than 1-3/4”?

Resolution: To prep a door wider than 1-3/4” for a 3130 to be concealed in the door, you will center the closer body in the middle of the door. The C/L of the track and the C/L of the closer body will sti...:

Why Doesn't the Schlage Touch Come with a Key?

Resolution: The Schlage Touch Series is a truly keyless lock and does not include a manual backup key.The Schlage Touch Series is also the only residential lock series to offer a truly pick-proof and bump-proo...:

What is a Key code?

Resolution: The five digit code stamped into the head of the key represents the 5 pins that are inside the cylinder.:

Does Falcon have a 1 1/4" SFIC mortise cylinder housing?

Resolution: Falcon previously had a 1 ¼" dimension SFIC mortise cylinder housing. This housing would accept a 6-pin SFIC core only. The C986 cylinder was discontinued in 2006. :

Can Schlage latches be used if the door prep hole is between 2 3/8" and 2 3/4?

Resolution: Schlage latch's comes equipped with 2 holes one for the 2 3/8" size and the other for 2 3/4 there would be no way to install in-between those 2 measurements.: